It is possible to put the VideoBooth software into a stress test mode.  In this mode the software will automatically move through the user interface pressing buttons at random and adding placeholder strings of data into keyboards.  


Stress test can be turned on from the configuration within Control Console.  The stress test simulates the speed an average user would take to move through the screens.  There is also a high speed stress test option which does the same function but without any delays between button presses.


  1. Open Control Console
  2. Activate Power User mode using SHIFT + P
  3. Click on the menu in the top left and select Configuration and Current
  4. Scroll down to the Stress Test - Tick this option
  5. Also tick the High Speed Stress Test option below if desired.
  6. Press Install
  7. Now run VideoBooth and the stress test will automatically begin.


See attached video example.